Partsam 4Pcs Mini 2.5 Inch Amber/Red Trailer Led Side Fender Marker Clearance Lights 2 Diodes Surface Mount, Sealed Mini Rectangular Rectangle Boat Marine Led Courtesy Lights Waterproof 2.54×1.06


Partsam 5559068875 - Before placing orders, please compare the size with your stock bulb. Also some put them on motorhome as position lights. Thank you! ** package includes: 2 x universal red side/fender marker no screws 2 x Universal AMBER Side/Fender Marker no screws Partsam 2red+2amber 12v dc side Marker trailer Light Mini-Sealed LED Surface mount design.

Two-wire design includes both lead wire and ground wire for mounting to all surfaces. Features sonically sealed, waterproof lens and housing in a single unit. We also get feedbacks form our customers and they use them for trailer lights 2 for brake lights and two for tail light on each side. Easy to install with free end wire black is positive: White is Negative/ground ; the wires come out of the back of the light; Two-wire design includes both lead wire and ground wire for mounting to all surfaces;.

Partsam 4Pcs Mini 2.5 Inch Amber/Red Trailer Led Side Fender Marker Clearance Lights 2 Diodes Surface Mount, Sealed Mini Rectangular Rectangle Boat Marine Led Courtesy Lights Waterproof 2.54x1.06 - . Size and connections: Size: 64mm x 26mm x 18mm 2. 52'' x 1. 02'' x 07'' hole distance: 46mm 1. 8'' wire length: 150mm 6'' 2 wires Connection: White is Negative and Black is Positive. Partsam offers an extensive line of high quality marker lights for car, bus, RV, truck, caravan, trailer, van, camper, lorry, boat, etc.

More information about Partsam 5559068875

Partsam Red Clearance ID BAR Marker Light 3 Light 9 LED Trailer Sealed Stainless Steel, Sealed 3-Light Truck and Trailer Identification LED Light Bar Red Led Strip w/Black Base


Partsam - Size: 363mm x 30mm x 29mm 14. 3'' x 1. 18'' x 1. 1''; hole distance: 215mm 8. 46''; installation scews are included. Package includes: 1 x red id bar light marker partsam 1 x red waterproof identification light bar for trailers trucks etc, STAINLESS STEEL black base; LED identification light bar for trailer applications more than 80" wide.

Three replaceable 3-led lights id bar universal for 12V Vehicles: Trucks and trailers as travel trailer, cargo trailer, camper trailer, boat trailer, horse trailer, RV, motorhome etc. Sealed, totally 9leds, 3-leds each light, waterproof; surface mount, three-light, Red Lens Red Light. East to install: the light contains a single lead wire for power and is grounded through the mounting hardware.

Partsam Red Clearance ID BAR Marker Light 3 Light 9 LED Trailer Sealed Stainless Steel, Sealed 3-Light Truck and Trailer Identification LED Light Bar Red Led Strip w/Black Base - Stainless steel base is specially designed, passed the standard test. Partsam is one of the largest automotive aftermarket marker lights providers in North America. Size: 363mm x 30mm x 29mm 14. 3'' x 1. 18'' x 1. 1'' hole distance: 215mm 8. 46'' wire length: 150mm 6'' product weight: 104g 1 wire Connection: Screw is the Negative Anyone of the three screws and Red Wire is the Positive end.

You can find all the marker lights you need in partsam! partsam 3-led bar light Red, Stainess Steel Black BASE SEALED Specfs: Led Qty: 3-LEDs in each light, 3 lights totally 9LEDs.

More information about Partsam


Similar products



15" Red 9-LED Trailer Light Bar with Black Stainless Steel Bracket DOT Certified IP67 Submersible ID Marker Tail Light for 80" or Wider Trailers


ONLINE LED STORE 5823976259 - Enhance the visibility and safety of your 80″ or wider trailerbacked by a DOT FMVSS-108 certification, our 15″ trailer ID bar is an easy-to-install, feature-rich way to draw extra visibility to your 80″ or wider trailer. As an added bonus, the mounting bracket has notches for easy wire routing and simplified installation.

Features:dot fmvss-108 ratedsuperior waterproof sealpositive input wire and ground wire attachedfully-submersible ip67 ratedstainless steel construction and hardwareRequired ID light bar for trailers measuring 80″ or widerEasy, hassle-free installation What's Included?15" Trailer Clearance ID Marker Light BarPack of ScrewsInstruction Manual Partsam 1 x red waterproof identification light bar for trailers trucks etc, STAINLESS STEEL black base; LED identification light bar for trailer applications more than 80" wide.

15" Red 9-LED Trailer Light Bar with Black Stainless Steel Bracket DOT Certified IP67 Submersible ID Marker Tail Light for 80" or Wider Trailers - Three replaceable 3-led lights id bar universal for 12V Vehicles: Trucks and trailers as travel trailer, camper trailer, RV, horse trailer, cargo trailer, boat trailer, motorhome etc. Sealed, waterproof; surface mount, totally 9LEDs, three-light, 3-LEDs each light, Red Lens Red Light. East to install: the light contains a single lead wire for power and is grounded through the mounting hardware.

We even incorporated a water drainage notch into our mounting bracket for additional protection against the elements. Convenient features simplify Operation & InstallationA Positive input wire and a Ground wire are attached to the bar for straightforward installation. Stainless hardware included.

More information about ONLINE LED STORE 5823976259


Similar products



Fulton Plastic Fender, 14-Inch, White


CEQUENT FULTON CC33218 - Impact resistant. Built-in fender skirt. Country of Manufacture: -United States. Anyone of the three screws is the Negative and Red wire is the Positive end. 008574 size: 14" tire, color: White Features: -High density polyethylene fenders. Stainless hardware included. Straight-forward installation- mounting bracket features notches on its short sides for easy wire routing; positive input wire and ground wire are attached; mounts on 8.

5" centers. Fulton. Corrosion proof. Size: 363mm x 30mm x 29mm 14. 3'' x 1. 18'' x 1. 1''; hole distance: 215mm 8. 46''; installation scews are included. A must for 80" or wider trailers - trailers measuring 80" or wider require identification lights for additional visibility; mount this clearance light bar on the top of your truck/trailer or between the taillights to draw extra visibility to your wide trailer for added on-road safety.

Fulton Plastic Fender, 14-Inch, White - Dot-certified reflective lens - unlike cheaper, inferior quality ID bars, our unit boasts a DOT FMVSS-108 rated reflective lens design compliant with all relevant laws and regulations. Ip67 submersible rated - waterproof and entirely-submersible for unparalleled all-weather usability; mounting bracket features water drainage notch for added protection.

Solid construction - black bracket is made of long-lasting stainless steel, NOT substandard plastic like other light bar brackets.

More information about CEQUENT FULTON CC33218


Similar products



8 Feet, Weatherproof - MICTUNING Heavy Duty 7 Way Plug Inline Trailer Cord with 7 Gang Junction Box


MICTUNING MIC-TWB-031 - Size: 363mm x 30mm x 29mm 14. 3'' x 1. 18'' x 1. 1''; hole distance: 215mm 8. 46''; installation scews are included. A must for 80" or wider trailers - trailers measuring 80" or wider require identification lights for additional visibility; mount this clearance light bar on the top of your truck/trailer or between the taillights to draw extra visibility to your wide trailer for added on-road safety.

Dot-certified reflective lens - unlike cheaper, inferior quality ID bars, our unit boasts a DOT FMVSS-108 rated reflective lens design compliant with all relevant laws and regulations. Ip67 submersible rated - waterproof and entirely-submersible for unparalleled all-weather usability; mounting bracket features water drainage notch for added protection.

Solid construction - black bracket is made of long-lasting stainless steel, NOT substandard plastic like other light bar brackets. Why chose from us? you'll get 2 year mictuning warranty and lifetime best customer service from us! MICTUNING believe that our professional and responsive customer service make a more critical difference than competitive prices or quick shipment, and we provide solutions other than just answer questions.

8 Feet, Weatherproof - MICTUNING Heavy Duty 7 Way Plug Inline Trailer Cord with 7 Gang Junction Box - Anyone of the three screws is the Negative and Red wire is the Positive end. Also, we focus on offering the premium products to meet the needs of customers on the growing market. 008574. What you'll get:2 year mictuning warranty and lifetime best customer service, making the whole junction box waterproof, 1 x 7-Way Trailer Plug with Junction Box, 4x Close Grommets.

More information about MICTUNING MIC-TWB-031


Similar products



AUTOSMART 2PCS Red Oval Sealed LED Turn Signal and Parking Light Kit with Light, Grommet and Plug for Truck, Trailer Turn, Stop, and Tail Light


AUTOSMART POT-03 - Anyone of the three screws is the Negative and Red wire is the Positive end. Package include: 2PCS Red LED trailer lights. Wiring is pre-sliced for quick installation. Stainless hardware included. Straight-forward installation- mounting bracket features notches on its short sides for easy wire routing; positive input wire and ground wire are attached; mounts on 8.

5" centers. Fulton. What you'll get:2 year mictuning warranty and lifetime best customer service, making the whole junction box waterproof, 1 x 7-Way Trailer Plug with Junction Box, 4x Close Grommets. Stop, atv & tail light - this 2-piece red led light set is designed for multi-function use as a brake or stop light, boat & large trailers, turn signal and tail light.

AUTOSMART 2PCS Red Oval Sealed LED Turn Signal and Parking Light Kit with Light, Grommet and Plug for Truck, Trailer Turn, Stop, and Tail Light - Durable waterproof design - each acrylic LED lens is sonic welded to the housing and built for maximum durability in working conditions and rough weather. Included black rubber grommet makes for an extra easy surface mount setup - no holes or screws required. Mount to the back of small & jet ski trailers, TURN & dirt bike trailers.

Bright & highly visible - 10 bright lED diodes brilliantly illuminate and cut through darkness & low-visibility conditions to light up the rear of your vehicle or trailer. 008574. This kit includes LED light, grommet and plug.

More information about AUTOSMART POT-03


Similar products



Partsam 2 Amber + 2 Red 12V 4" x 2" Oval Led Truck Side Marker Light Surface Mount 10Diode, Sealed Trailer Led Clearance and Side Marker Lights, Black Base, Rectangular Rectangle Led Lights


Partsam - Features: 1 with the founction of side marker lamp / Identification light / side clearance lamp / Marker Trailer light etc. Wiring is pre-sliced for quick installation. 2 led quantity: 10 diodes 3 voltage: 12v 4 color: red/amber 5 polycarbonate lens & housing are sonically sealed 6 Chemical resistance &100% waterproof Dimension: Size: 102mm x 51mm x 28mm 4" x 2" x 1.

1" hole distance: 77mm 3" wire length: 150mm 6" Screw size: 20mm x 3. 5mm 079" x 014" lxd 2 screws are included. Stainless hardware included. Straight-forward installation- mounting bracket features notches on its short sides for easy wire routing; positive input wire and ground wire are attached; mounts on 8.

Partsam 2 Amber + 2 Red 12V 4" x 2" Oval Led Truck Side Marker Light Surface Mount 10Diode, Sealed Trailer Led Clearance and Side Marker Lights, Black Base, Rectangular Rectangle Led Lights - 5" centers. Fulton. Partsam is one of the largest automotive aftermarket marker lights providers in North America. Included black rubber grommet makes for an extra easy surface mount setup - no holes or screws required. Size: 363mm x 30mm x 29mm 14. 3'' x 1. 18'' x 1. 1''; hole distance: 215mm 8.

More information about Partsam


Similar products



iBrightstar 12V Submersible Square Trailer Tail LED Light kit Super Bright Brake Stop Tail License Lights for Camper Truck RV Boat Snowmobile Under 80" Inch Marine, Red/White


iBrightstar 5823975715 - Size: 363mm x 30mm x 29mm 14. 3'' x 1. 18'' x 1. 1''; hole distance: 215mm 8. 46''; installation scews are included. A must for 80" or wider trailers - trailers measuring 80" or wider require identification lights for additional visibility; mount this clearance light bar on the top of your truck/trailer or between the taillights to draw extra visibility to your wide trailer for added on-road safety.

Dot-certified reflective lens - unlike cheaper, inferior quality ID bars, our unit boasts a DOT FMVSS-108 rated reflective lens design compliant with all relevant laws and regulations. Ip67 submersible rated - waterproof and entirely-submersible for unparalleled all-weather usability; mounting bracket features water drainage notch for added protection.

iBrightstar 12V Submersible Square Trailer Tail LED Light kit Super Bright Brake Stop Tail License Lights for Camper Truck RV Boat Snowmobile Under 80" Inch Marine, Red/White - Solid construction - black bracket is made of long-lasting stainless steel, NOT substandard plastic like other light bar brackets. Service life: up to 30, 000 Hours. Anyone of the three screws is the Negative and Red wire is the Positive end. Function on right: 15 diodes 12 red+3 red led Combination stop tail side marker light w/reflector-Curb side Working Voltage: fit 12V system.

Color light: White/Red. Waterproof: IP68. Features function on left: 19 diodes 12 red+3 Red+4 White LED Combination stop turn tail side marker light w/reflector-Street side with license illuminator.

More information about iBrightstar 5823975715


Similar products



ONLINE LED STORE 4-Way Flat Wishbone-Style Trailer Wiring Harness Kit 25' Male & 4' Female 18 AWG Color Coded Wires SAE J1128 Rated with 4 Flat Connector for Under or Over 80" Wide Trailers


ONLINE LED STORE 5823931592 - Package include: 2PCS Red LED trailer lights. Wiring is pre-sliced for quick installation. Set of 2 pack high brightness diodes led combination with better heat distribution, designed for 12v system. Used as led marker clearance light, Auto side Lamp, clearance light, identification light, trailer Light etc.

Universal for 12v vehicles like pickups, Trucks, Trailers, SUV van Caravan and Boat Lorry Bus Camper RV etc. Can also be used as combination side marker and clearance light when properly mounted. Dimension: 102mm x 51mm x 28mm 4" x 2" x 1. 1" ; hole distance: 77mm 3 inch. 008574. To further simplify the installation process, our kit features color coded 18 AWG wires for safely determining each wire’s function.

Superior quality guaranteed by a generous WarrantyThis 4-way flat wishbone style trailer harness kit is constructed from the highest quality materials and undergoes stringent quality assurance checks before leaving the factory. For additional peace of mind, we offer a generous 2 year warranty to ensure your complete satisfaction.

ONLINE LED STORE 4-Way Flat Wishbone-Style Trailer Wiring Harness Kit 25' Male & 4' Female 18 AWG Color Coded Wires SAE J1128 Rated with 4 Flat Connector for Under or Over 80" Wide Trailers - Features:male side 25′ & female side 4′ included in kitlong total wiring length makes kit suitable for trailers under & over 80″ wideColor coded 18 AWG wiresSAE J1128 ratedWishbone-style wiring setup Partsam 1 x red waterproof identification light bar for trailers trucks etc, STAINLESS STEEL black base; LED identification light bar for trailer applications more than 80" wide.

Three replaceable 3-led lights id bar universal for 12V Vehicles: Trucks and trailers as travel trailer, camper trailer, boat trailer, cargo trailer, horse trailer, RV, motorhome etc. Sealed, totally 9leds, 3-leds each light, waterproof; surface mount, three-light, Red Lens Red Light.

More information about ONLINE LED STORE 5823931592


Similar products



2pc 6" Oval Red LED Trailer Tail Lights DOT Certified Grommet & Plug Included IP67 Waterproof Turn Stop Brake Trailer Lights for RV Jeep Trucks


ONLINE LED STORE - And speaking of rain, our lights are IP67 submersible waterproof rated so you don’t have to worry about the weather or the lake. Yes, or jeep, trailer, they will Work for YouWhether you're upgrading your tractor, these lights are the ideal choice. Partsam 2red+2amber 4inch rectangle Side Turn Marker Trailer Lights - 10 Diodes.

Durable waterproof design - each acrylic LED lens is sonic welded to the housing and built for maximum durability in working conditions and rough weather. Anyone of the three screws is the Negative and Red wire is the Positive end. Stainless hardware included. Straight-forward installation- mounting bracket features notches on its short sides for easy wire routing; positive input wire and ground wire are attached; mounts on 8.

2pc 6" Oval Red LED Trailer Tail Lights DOT Certified Grommet & Plug Included IP67 Waterproof Turn Stop Brake Trailer Lights for RV Jeep Trucks - 5" centers. Fulton. And since our lights are sae and dot fmVSS-108 certified, you can be sure that they are a perfect fit and completely legal. Featuressae and dot fmvss-108 certifiedindustry standard size10 colored leds with colored lenssubmersible waterproof ratinggrommet and connector includedparking/turn/brake for amber and RedBright Reverse for White2-Year Warranty What's Included?2 6" 10-LED Oval Tail Light - Red1 6" Oval Tail Light1 6" Oval Rubber Grommet1 3-Pin Connector1 Instruction Manual Partsam 1 x red waterproof identification light bar for trailers trucks etc, STAINLESS STEEL black base; LED identification light bar for trailer applications more than 80" wide.

Three replaceable 3-led lights id bar universal for 12V Vehicles: Trucks and trailers as travel trailer, horse trailer, boat trailer, cargo trailer, camper trailer, RV, motorhome etc. Sealed, three-light, totally 9leds, 3-LEDs each light, waterproof; surface mount, Red Lens Red Light.

More information about ONLINE LED STORE


Similar products



AutoSmart 4" Round LED Stop Turn Tail Light Includes Pair Light Red Lens, Grommet, Plug For Truck Trailer


AUTOSMART POT-01 - Functions as stop tail Rear/ Side reflector Side Marker and License Illuminator on left. Application: universal for trucks, special vehicle, dump Truck, trailers under 80", tractors, boat, bus, semi-trailer, etc. Use ultrasonic welding technology to achieve IP68 Waterproof, it will prevent from any bad weather and diving with a Longer life span.

Super bright with high visibility safety lights, big difference between Low and High brightness, EASY TO INSTALL. Made in Taiwan. Used as led marker clearance light, clearance light, identification light, Auto side Lamp, trailer Light etc. Universal for 12v vehicles like pickups, Trucks, Trailers, SUV van Caravan and Boat Lorry Bus Camper RV etc.

AutoSmart 4" Round LED Stop Turn Tail Light Includes Pair Light Red Lens, Grommet, Plug For Truck Trailer - Can also be used as combination side marker and clearance light when properly mounted. Dimension: 102mm x 51mm x 28mm 4" x 2" x 1. 1" ; hole distance: 77mm 3 inch. 008574. Set of 2 pack high brightness diodes led combination with better heat distribution, designed for 12v system. Why? because getting rear-ended can really ruin your day.

Working smarter not harder - we like it when things are easy, so we've included an easy to use grommet for you to upgrade your lights in mere minutes. Acrylic lens is sonic welded to the housing.

More information about AUTOSMART POT-01


Similar products